Brick Paver Installation & Edging



Staging of product

Many paver tasks will vary depending on gain access to, site conditions, job size and of course, the weather. Cautious factor to consider ought to be taken to identify the time to begin the paver installation.

The foreman or job manager ought to constantly have the materials (sand/ pavers) dispersed around the project website for simple and efficient installations. Paver pallets/bundles need to be placed in a way not to interfere with the paver installation. The proper pallet/bundle placement can make the real job installation much easier and quicker by decreasing the total labor of handling the product.

Brick paver patterns

Pavers can be positioned in many different patterns depending upon their shape. Each paver shape will generally have a number of various hatch patterns that are provided by the producer.

The laying pattern and shape of the paver is really crucial to the efficiency of the application. Contractors need to think about the traffic weight loads on their paver projects. 90 or 45 degree herringbone patterns are suggested in all street and driveway applications, as these patterns will supply the maximum load support required and will withstand creeping from the turning of tires and braking or beginning of automobile traffic. In many applications around the world, it has actually been shown that pavers laid in a herringbone pattern have carried out effectively.

Pavers that are 60 mm (2 - 3/8 in) thickness are suitable for pedestrian applications. Pavers that are going to be utilized in business or industrial applications need to be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver task.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface area of the bedding sand at the completed elevation of the pavers This will assist as a guide for keeping straight joint lines and will likewise allow the installer to make adjustments in the alignment of the pavers.

Structures and concrete suppressing are usually not straight and should not be used for establishing straight joint lines. The use of string lines is important to identify the real straightness of the edge. As the paver installation advances, the string lines will assist minimize the requirement for small trim pieces.

These will maintain a minimum joint width and allow the bedding and jointing sand to go into between each paver. Pavers with spacer bars are normally not laid in snug versus each other considering that a string line will supply constant joint spacing.

Installation of brick pavers.

Among the most extensively utilized approaches for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. This will provide you a real and straight line off which to work. As soon as this row is developed, you can continue to work outward into the field with the rest of the pavers. Always make sure to occasionally examine your joint lines to make sure they are straight and real. If not, changes to the pavers can be made as you continue setting up. Pavers needs to be set up hand tight. The very best approach is to position a paver versus another one and let it move down into the bed linen sand. Do not kick or tap the pavers into location as this can toss your lines out of real straightness.

When setting up pavers on a high grade, they must be set up at the base of the grade going uphill. This will avoid the pavers from creeping as they are being laid.

The finest method for setting up pavers on large projects is to install them mechanically. There are a couple items a contractor should think about before installing pavers mechanically:

1.) Mechanical installers are just efficient in setting up pavers in specific patterns.

2.) The professional must make sure that the manufacturer is capable of production and bundling pavers in the wanted pattern on the pallets for easy mechanical installation.

3.) Contractors may encounter a color mixing scenario coming off the packages of pavers Poor color mixing could result in a patchy looking installation. The majority of makers follow color blending on each bundle of pavers, but it is the contractor's duty to ensure correct mixing in the field.

Cutting procedures for brick pavers.

Contractors typically have 2 methods of cutting pavers. Pavers are cut either by 1). A double bladed guillotine or by 2). A gas powered cut off saw or brick saw which is equipped with a diamond blade. The diamond blade cut-off saw or brick saw will provide a much cleaner and more precise cut. A lot of brick saws will have a hose pipe attachment on them which will permit the operator to cut the pavers damp. When cutting pavers damp, it will help reduce dust and will prolong the diamond blades life. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting damp, due to that the pavers will create a slurry that will stain the paver surface area. Pavers that are cut ought to not fit tight, sufficient spacing needs to be offered for jointing sand.

The brick saw operator needs to always use the correct defense that is needed for operating a saw, such as eye, ear, respiratory and hand defense ).

Edging types

Edge restraints play a significant function in the general success of an interlocking pavement installation Edging restraints get rid of lateral motion of the pavers and hold the pavers tightly together. Specifically at the outer perimeter of the paver application, without an edging restraint, your project is ensured to fail with time.

Generally made edge restraints are the most typically used by professionals. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bed linen sand and eventual lateral motion of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is recommended. When a space between the pavers and the edging goes beyond 3/8" (10mm), then the area should be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers have to be compacted. The whole area that is to be compressed ought to be swept tidy of any foreign objects and particles that can cause scuffing or scratching on the surface of the pavers.

In addition, it is essential that the very first compaction takes location prior to any jointing sand has been applied to the pavers. If jointing sand is used to the pavers prior to compaction takes place, this can cause a bridging issue and will not permit the joints to be completely filled with jointing sand. This can also avoid the pavers from being properly set into the bedding sand.

When condensing the pavers, it is advised that you make at least two passes in various instructions throughout the pavers. This will allow the pavers to be correctly embeded in the bed linen sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very vital to the last efficiency of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure over time.


Paver pallets/bundles ought to be put in a way not to interfere with the paver installation. One of the most extensively utilized methods for the installation of pavers Paver Installation Boca Raton is hand installation of each paver. The operator of the brick saw should always cut the pavers away from the surface area of the paver field when cutting damp, due to the reality that the pavers will develop a slurry that will stain the paver surface area. Edging restraints eliminate lateral movement of the pavers and hold the pavers firmly together. When a gap in between the pavers and the edging surpasses 3/8" (10mm), then the area needs to be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *